|
Remote Support
| |
BLUE-EXPIO Encoder and Trigger Inteface Module for
OASIS-blue
The BLUE-EXPIO is an optional plug-in daughter board
for the OASIS-blue controller, providing
support for encoder inputs on all axes, as well as synchronization between the
OASIS-blue motion
controller and various digital cameras supporting trigger signals.
The BLUE-EXPIO is the core hardware technology enabling Turboscan
fast mosaic imaging for digital cameras supported by the Surveyor
application solution.
Other applications of the BLUE-EXPIO include implementations of
fast, precise digital autofocus, as well as improved speed of 3D stack
acquisition. OASIS Library support includes synchronized Z-axis
position readout based on BLUE-EXPIO information.
Key Features
 | RS-422 / TTL encoder support |
| Compatible with TTL, Opto, and RS-422 trigger signals |
| Library support for synchronized Z-axis position data |
| Daughter board to OASIS-blue for minimum footprint |
| Enables Turboscan and digital autofocus for Surveyor |
|
BLUE-DAC 4-Channel Analog Controller, Axis 5/6, and
Video Autofocus Module for OASIS-blue
The Objective Imaging BLUE-DAC is an optional plug-in daughter board
for the OASIS-blue controller, providing four
channels of analog I/O, video autofocus, and control electronics for axes
5 and 6.
The BLUE-DAC offers four channels of 16-bit
digital to analog converters ideally suited for Piezo focus and other
applications where 0-10V analog control is required. The BLUE-DAC
module includes one on-board DAC channel output to allow easy connection
of a Piezo focus amplifier.
The BLUE-DAC includes an on-board analog video
digitizer with goodness of focus scoring and advanced features such as
dual thresholding (one per interlace) with area and maximum chord length
measurement hardware, all done at camera frame-rates.
Also, when used in conjunction with the BLUE-CONNECT
output PCB, the BLUE-DAC offers control electroncis to expand the
OASIS-blue from four to six total axes.
Key Features
| Four channels of 16-bit DACs for 0-10V analog control
outputs |
| Four channels of 16-bit ADCs |
| Control logic for stepper axes 5 and 6 at full
microstepping resolution |
| Video-based autofocus in conjunction with OASIS-blue
DSP |
|
BLUE-CONNECT Advanced Output and Fan Card
The Objective Imaging BLUE-DAC is an optional plug-in daughter board
for the OASIS-blue controller, providing four
channels of analog I/O, video autofocus, and control electronics for axes
5 and 6.
The BLUE-DAC offers four channels of 16-bit
digital to analog converters ideally suited for Piezo focus and other
applications where 0-10V analog control is required. The BLUE-DAC
module includes one on-board DAC channel output to allow easy connection
of a Piezo focus amplifier.
The BLUE-DAC includes an on-board analog video
digitizer with goodness of focus scoring and advanced features such as
dual thresholding (one per interlace) with area and maximum chord length
measurement hardware, all done at camera frame-rates.
Also, when used in conjunction with the BLUE-CONNECT
output PCB, the BLUE-DAC offers control electroncis to expand the
OASIS-blue from four to six total axes.
Key Features
| Four channels of 16-bit DACs for 0-10V analog control
outputs |
| Four channels of 16-bit ADCs |
| Control logic for stepper axes 5 and 6 at full
microstepping resolution |
| Video-based autofocus in conjunction with OASIS-blue
DSP |
|
|
